HD-C36C Full Color Asynchronous Controller System is a LED control system that supports mobile APP wireless management, Web-based cloud remote control, relay function for remote switch on/off power supply and 60Hz frame HD video image output and it support 524,288 pixels control capacity.
Supported computer software HDPlayer, mobile phone control software LedArt and HD Cloud Platform.
HD-C36C integrated sending card and receiving card function, can single cassette with small screen, can also add HD-R series receiving card to control bigger screen.
Ø Control Range: 5204,288 pixels (1024*512).
Ø 4GB memory, support expending memory by U-disk.
Ø Support HD video hardware decoding, 60Hz frame rate output.
Ø Support widest 8192 pixels, Highest 1024 pixels.
Ø No need set IP address, it could be identified by controller ID automatically.
Ø Unified management of more LED display through Internet or LAN.
Ø Equipped with Wi-Fi function, Mobile APP management directly.
Ø Equipped with 3.5mm standard audio interface output.
Ø Meanwhile support to add 4G networking module connect to Internet (Optional).
Ø Equipped with 10 lines HUB75E port, can be used for one receiving card.
Ø Equipped with 1 group of relay module, support switch on/off power supply directly remotely.
System Function List
Compatible with indoor and outdoor full color and single color module
Support conventional chip and mainstream PWM chip
Static to 1/64 scan mode
1024*512, widest 8192, highest 1024
Video, Pictures, Gif, Text, office, Clocks, Timing etc.
Remote, Temperature, Humidity, Brightness etc.
Support 1080P HD video hardware decoding, direct transmission, without transcoding waiting.
60Hz frame frequency output；
AVI, WMV, MP4, 3GP, ASF, MPG, FLV, F4V, MKV, MOV, DAT, VOB, TRP, TS, WEBM, etc.
Support BMP, GIF, JPG, PNG, PBM, PGM, PPM, XPM, XBM etc.
Text editing, Image, Word, Txt, Rtf, Html etc.
DOC, DOCX, XLSX, XLS, PPT, PPTX etc. Office2007Document format.
Classic Analog clock, digital clock and of clock with image background.
Double track stereo audio output.
4GB Flash memory; Indefinite expanding of U-disk memory.
Ethernet LAN port, 4G network (optional), Wi-Fi, USB.
INPUTS: 5V DC*1, 100 Mbps RJ45*1, USB 2.0*1, test button*1, sensor port*1, GPS port*1.
OUT:1Gbps RJ45*1, AUDIO*1
1. Power Supply port: connected 5V DC power supply.
2. Output network port: 1Gbps network port, connect to receiving card.
3. Input Network port: Connect to PC or router.
4. Audio output port: support standard two-track stereo output.
5. USB port: connected to USB device, e.g. U-disk, Mobile hard disk etc.
6. Wi-Fi antenna connection port: connect with external Wi-Fi antenna.
7. 4G network antenna connection port: connect with external 4G antenna.
8. Test button: LED screen burn-in test
9. 4G indicator light: display 4G network status.
10. Mini PCIE port: connect with 4G networking module for cloud control (Optional).
11. Display indicator light: working status is Flicking.
12. HUB75E port: connect to LED modules with flat cable.
13. Reserved interface, no definition.
14. Temp sensor connection port: connect to temperature sensor and show the real-time value.
15. Relay control connection port: the power supply connection port of the relay
16. GPS port: connected GPS module.
17. Sensor port: connect S108 and S208 sensor kit.
18. Controller working state indicator light: PWR is Power lamp for status of power supply, when working normally, the lamp is always on, RUN is running lamp, when working normally, the lamp will be blinking.
19. Fool-proof power interface: 5V DC power interface, with fool-proof design, with the same function as the “1” 5V DC terminal.
Copyright © 2021 Shenzhen Huidu Technology Co.,Ltd. - All Rights Reserved.