Best quality All-in-one led wall processor controller

HD-VP210 and VP410 is a powerful 3-in-1 LED controller which integrated the function of video processor and synchronous sending card, support U-disk playing video and picture files directly, 5 channels digital and analog video input, come with WiFi mode, support mobile APP wireless management, suport preset saving and calling of scenarios, support saving 7 user templates, support 1.3 million pixel and 2.6 million pixel control range, the widest is 3840 pixels, the highest is 1920 pixels.




  • HD-VP210 Spec. V3.0 and User Manual.pdf Download
  • HD-VP410 Spec. V2.0 and User Manual.pdf Download
CONTACT US
SEND INQUIRY NOW

Email:

xzj@huidu.cn

Website:

www.hdwell.com

Phone:

+86 18007554646

Telephone:

+86 18007554646

WeChat:

18007554646


Overview

HD-VP210 is one powerful 3-in-1 controller which integrated the function of one single-picture video processing and one sending card.

Features:

1). Control range: 1.3 million pixels, widest 3840, highest 1920.

2). Seamless switching of any channel.

3). 5 channels digital and analog video input, USB playing video and picture files directly;

4). Audio input and output.

5). Integrated the function of sending card and two output Gigabit Network ports.

6). Key lock.

7). Preset saving and calling of scenarios, support saving 7 user templates.

8). Come with Wi-Fi module, mobile APP wireless control.


HD-VP410 is one powerful 3-in-1 controller which integrated the function of one single-picture video processing and one sending card.

Features:

1). Control range: 2.6 million pixels, widest 3840, highest 1920.

2). Seamless switching of any channel.

3). 5 channels digital and analog video input, USB playing video and picture files directly.

4). Audio input and output.

5). Integrated the function of sending card and four output Gigabit Network ports.

6). Key lock.

7). Preset saving and calling of scenarios, support saving 7 user templates.

8). Come with Wi-Fi module, mobile APP wireless control.

Connection diagram

Dimensions

Product Operation

5.1 Operation steps

Step 1: Connect the display power to the screen.

Step 2: Connect a playable input source to the HD-VP210/HD-VP410.

Step 3: Use the USB serial port to connect to the computer to setting screen parameters.

 

 

 

5.2 Input Source Switching

HD-VP210/HD-VP410 supports simultaneous access to 5 types of signal sources, which can be switched to the input source to be played at any time according to requirements.

 

Switch input source

There are two ways to switch the input source. One is to quickly switch by pressing the “SOURCE” button on the front panel, and the other is to select through the input source of the menu interface.

Step 1: Press the knob to select “Input Settings → Input Source” to enter the input source interface.

Step 2: Turn the knob to select the input source.

Step 3: Press the knob to confirm that the currently selected input source is the input of the playback screen.

 

Set resolution

Step 1: Press the knob to select “Input Settings → Input Resolution” to enter the input resolution interface.

Step 2: Rotate the knob to select the desired resolution or select a custom resolution setting.

Step 3: After setting the resolution, press the knob to determine the resolution.

 

5.3 Zoom setting

HD-VP210/HD-VP410 supports full screen zoom and point to point zoom modes

Full screen zoom

The VP410 adaptively zoom the current input resolution to full-screen play according to the LED display resolution in the configuration.

Step 1: Press the knob to enter the main menu, select “Zoom Mode” to enter the zoom mode interface;

Step 2: Press the knob to select the mode, then rotate the knob to switch between full screen and local;

Step 3: Press the knob to confirm the use of the “Full Screen or Local” zoom mode.

Point-to-point scaling

Point-to-point display, without scaling, the users can set the horizontal offset or vertical to display the area they want.

Step 1: Press the knob to enter the main menu, select “Zoom Mode” to enter the zoom mode interface;

Step 2: Rotate the knob to select "point to point";

Step 3: Press the knob to confirm the use of "point-to-point";

Step 4: Press the knob to enter the "point-to-point" setting interface

In the "point-to-point" settings interface, through the knob set "horizontal offset" and "vertical offset" to view the area you want to display.

 

5.4 Playing by U-disk

HD-VP210/HD-VP410 supports directly play pictures or video files stored in a USB.

Step 1: Rotate the knob to “U disk setting”, press the knob to enter the U disk setting interface;

Step 2: Turn the knob to “Media Type” and press the knob to select the media type;

Step 3: Rotate the knob to select the type of media, support video and picture, select the media type and press the knob to confirm;

Step 4: Rotate the knob to “File Browse” to enter the U disk playlist, and the device will automatically read the set media file.

Step 5: Press ESC to exit the playlist setting option and enter the U disk play settings.

Step 6: Turn the knob to “Cycle Mode”, it support single loop or list loop.

When the media type is "picture", it also supports turning "picture effects" on and off and setting the picture switching interval duration.

Play Control

In the front panel input source area, press “USB” to switch to the USB input source, press the USB button again to enter the USB play control. After the USB play control is enabled, the HDMI, DVI, VGA and USB button lights are on, and the button corresponding multiplexing is enabled. Press ESC to exit playback control.

DVI:Play the previous file of the current file.

VGA:Play the next file of the current file.

HDMI:Play or pause.

USB■:Stop Play.

 

5.5 Picture quality adjustment

HD-VP210/HD-VP410 support users manually adjust the image quality of the output screen, so that the color of the large screen display is more delicate and bright, and the display effect is improved. When adjusting the image quality, you need to adjust it while watching. There is no specific reference value.

Step 1: Press the knob to enter the main menu, rotate the knob to “Screen Settings”, and press the knob to enter the screen setting interface.

Step 2: Turn the knob to “Quality Adjustment” and press the knob to enter the image quality adjustment interface.

Step 3: Press the knob to enter the “Image Quality” interface to adjust “Brightness”, “Contrast”, “Saturation”, “Hue” and “Sharpness”;

Step 4: Turn the knob to select the parameter to be adjusted, and press the knob to confirm the parameter selection.

Step 5: Rotate the knob to adjust the parameter value. During the adjustment process, you can view the screen display effect in real time.

Step 6: Press the knob to apply the currently set value;

Step 7: Press ESC to exit the current setting interface.

Step 8: Turn the knob to “Color Temperature”, adjust the color temperature of the screen, view the screen display in real time, and press the knob to confirm;

Step 9: Turn the knob to “Restore Default” and press the knob to restore the adjusted image quality to the default value.

 

5.6 Template setting

After debugging the video processor settings, you can save the parameters of this setup as a template.

The template mainly saves the following parameters:

Source information: store the current input source type;

Window information: save current window size, window position, zoom mode, input intercept, screen offset information;

Audio information: save audio status, audio size;

U-disk setting: save the loop mode, media type, picture effect and picture switching interval parameters of U-disk play;

Each time changing a parameter, we can save it to the template. The HD-VP210/HD-VP410 supports up to 7 user templates.

 

Template save

Step 1: After saved the parameters, select “Template Settings” on the main menu interface and press the knob to enter the template setting interface.

Step 2: Rotate the knob to select the template and press the knob to enter the template operation interface.

Step 3: Enter the template operation interface with three options: Save, Load, and Delete.

Save - Rotate the knob to select "Save", press the knob to save the currently edited parameters to the selected template. If the selected template has been saved, replace the last saved template;

Load - rotate the knob to select "Load", press the knob, the device loads the information saved by the current template;

Delete - Rotate the knob to select "Delete" and press the knob to delete the currently saved template information.








Add a comment
IF YOU HAVE MORE QUESTIONS,WRITE TO US
Just tell us your requirements, we can do more than you can imagine.
Name
Phone
E-mail
Company Name
Content