Do You Know How to Debug the LED Transparent Screen?-Huidu technology ,led screen controller

LED transparent screen is a new type of transparent display product created by the principle of human vision. Compared with traditional LED display, it has the characteristics of good heat dissipation, permeability, low power consumption, lightweight and convenient installation. It is widely used in glass curtain wall display and other occasions. In this video, we will teach you how to debug LED transparent display.

First, prepare an LED transparent screen module with a resolution of 256*64 pixels, an R5S receiving card and a new A3 asynchronous LED controller, as well as a network cable and a computer.

After we have installed all the devices we need to connect, we can start debugging.

Open HDSet software and debug with "new process"

Detecting the receiving card first to confirm whether the receiving card is connected normally

Then switch to the "Receive card parameters" interface for smart settings, click the "Smart Settings" button, set the box information loaded by the receiving card, check "Vertical Scan", select the chip model of the module, and change "Parallel" to "Serial".

Set the color channel according to the state of the mod

Set the row and column controlled by a group of RGB data 

Determine the scan method of module

Set the scanning mode of the module according to the display of the display screen. After mastering the rules of the module's tracing points, you can use the "Smart point" to quickly set.

The transparent display module adopts a two-open connection method, so we need to change the output mode to two-open output in "Advanced Settings".

Click the "Data Group Exchange" button, and then use the "Smart Exchange" function to set the data group exchange.

After modifying the basic parameters of the receiving card, click the "Send" button in the lower right corner, and then click the "Curing" button.

Switch to the "Connection Settings" interface, set the loading of the receiving card and the connection relationship between the receiving cards, and then click the "Send & curing" button. At this time, the debugging of the transparent screen is basically completed.

Next, just edit the program and send it to the A3 player box.

The debugging of the LED transparent screen is similar to the debugging of the conventional LED screen. Mastering it can do more with less.

If our video is helpful to you, please forward it, thank you!

After watching this video, give it a try~ As long as you learn to debug the transparent screen, the regular screen is very easy for you

If you like our video or Eden, please follow me and click like , your like is our update driving force